Creating a Revolve or Revolve Cut

Axis Selection

You can define the axis from the following:

Profile Selection

For a solid revolved feature, you can create a profile sketch from multiple intersecting profiles. You can select intersecting or nonintersecting sketches for the profile.
For a thin or surface revolved feature, you can create a profile sketch from multiple open or closed intersecting profiles.
Profiles cannot cross the axis.

From the section of the action bar, click Revolve or Revolve Cut .
Tip: In the Revolve dialog box, to toggle between Revolve and Revolve Cut, click Cut . The Cut option is available under the Add option.
Select an edge, line, or axis for Axis Selection.
Select profiles to revolve.
In the dialog box, select the revolve type and specify the end conditions.
For Revolve Cut , click Reverse Side to Cut to remove material from the outside of the profile.
To reverse the revolve direction, click Reverse Direction .
Click .