 | Reverse Side to Cut. Applies to Extrude Cut. Removes material from the outside of the profile. |
|
Sketch Plane Offset
Options. Applies an optional offset for the
extrusion.
|
At Sketch. Extrudes the
sketch profile from the sketch plane. |
|
End to end. Applies no
offset to the extrusion. |
|
From Offset. Extrudes the
sketch profile an offset distance from the original position of the sketch plane. |
|
From Selected
Geometry. Extrudes the sketch profile
an offset distance from the selected
geometry. |
|
|
Reverse Direction. Reverses the direction of the extrusion along the selected vector. |
 | Draft 1. Tapers the faces of
the feature using a specified angle for Direction 1  . |
 | Draft 2. Tapers the faces of
the feature using a specified angle for Direction 2  . This option is available when an end condition is selected for Direction 2. |
 |
Along Vector. Extrudes in
the direction defined by a selected face, edge, or axis. |
 |
Auto Merge. |