-
From the
Category list, select a ceiling category.
-
Under Support,
- Select a surface or a plane as a support.
You can select multiple supports and click Element List
to manage multiselection. - Optional:
Specify an offset from the selected support.
In case of multiple supports, you can select Common Offset
to apply the specified offset to all the selected supports. You can also set offsets to individual supports in the Element List dialog box.
-
Under
Limits, select limits for the ceiling.
You can select a surface, plane, or output profile as a limiting
element.
-
Under
Material, Thickness & Orientation,
-
Select a material for the ceiling.
-
Select a thickness corresponding to the selected material.
If the material table is not set in Data Setup, you can search and select the material from the database and enter the thickness value.
-
Set the thickness orientation.
|