About Regular Engineering Connection

A regular engineering connection is an engineering connection created between the child products of the active product.

This page discusses:

Example 1



  • Root_Product is the active product.
  • An engineering connection has been created between the representation of Product_C.1 and the representation of Product_D.1 (Product_A.1 can be repositioned).
  • The engineering connection appears under the Engineering Connections node of Root_Product (active product) and under the Connections of Product_A.1 node as a reminder (child and affected product of the active product that can be repositioned during the PLM update process).

Example 2



  • Root_Product is the active product.
  • An engineering connection has been created between the representation of Product_C.1 and the representation of Product_D.1 (Product_D.1 can be repositioned).
  • The engineering connection appears under the Engineering Connections node of Root_Product (active product) and under the Connections of Product_D.1 node as a reminder (child and affected product of the active product that can be repositioned during the PLM update process).

Example 3



  • Root_Product is the active product.
  • An engineering connection has been created between the representation of Product_C.1 and the representation of Product_D.1 (Product_D.1 or Product_A.1 can be repositioned).
  • The engineering connection appears under the Engineering Connections node of Root_Product (active product) and under the Connections of Product_D.1 and Connections of Product_A.1 nodes as a reminder (child and affected product of the active product that can be repositioned during the PLM update process).