Creating a User Defined Engineering Connection

You can create an engineering connection

Before you begin: Open an existing assembly.
  1. From the Assembly section of the action bar, click Engineering Connection .

    The Engineering Connection Definition dialog box appears.

  2. Select Coincidence.
    • A Coincidence is displayed.

      Select to delete or change the constraint type.

    • Two support as inputs are expected.
  3. Select a line on a component as first support, then a line on another component as second support.
    The selected supports are displayed:
    • Two Edges are displayed.
    • Select to clear the selection or change the support type.
    • The Alignment options are proposed:
      • Same
      • Opposite
      • Undefined
  4. Select a line on another component as second support.
  5. Optional: Repeat steps 2 to 4.
  6. Click OK in the Engineering Connection Definition dialog box.
    The engineering connection is created under the Engineering Connection node in the tree.