Creating Circular Cutouts

Circular Cutout lets you create circular cutouts that consists in removing material from a body.


Before you begin: Create a wall and draw a point on the wall.
  1. Select the point as the center of the circular cutout.
  2. To position the cutout, select the support.

    The support can be different from the support where the point lies. In this case, an orthogonal projection will be performed.

  3. Select the cutout type:
    OptionDescription
    Clearance Defined by a center point and a radius.
    Index Used to measure and validate parts.
    Manufacturing Used for manufacturing, for example to fasten a part on an equipment.
    Fastener Used as a rivet.
  4. Enter a diameter value.