- From the Model section of the action bar, click Sheetmetal Parameters
.
- Click Sheet Standards Files.
- In the From Search tab, enter the name of
the Sheet Metal table you are looking for and click Search.
- Click OK.
In the Sheetmetal Parameters Definition dialog box, the
Design Table
appears opposite to the Thickness and Default Bend Radius
boxes.
The parameters are disabled, indicating that
you can no longer modify the values.
- Click Thickness Design Table
and select the line containing the appropriate parameters.
- Click OK.
The parameter values are updated in the Sheetmetal Parameters
dialog box. - Click Bend Radius Design Table
.
- Select a line and click OK.
The parameter values are updated in the Sheetmetal Parameters Definition
dialog box.
- Create a flange.
The Surfacic Flange Definition dialog box reflects the modification
for the Radius.
The default mode, that is to say the formula:
Bend Radius = Part Radius is deactivated.
At that time, the parameters Thickness and Bend radius are driven
by the design table.
They are disabled, indicating that you can no longer modify the
values.
Note that if you create a bend, there is no design table: it's the
formula which is used.
|