In a 3D shape, you can have Part Design features
and Sheet Metal for Hydro-formed Parts features
according to the following rules:
Part Designfeatures can be created before Sheet Metal for Hydro-formed Parts features.
A Part Design feature can also be created after Sheet Metal for Hydro-formed Parts features as long as the 3D shape is in folded
view.
In the unfolded view, the Part Design feature will not
be displayed.
It is no longer possible to create Sheet Metal for Hydro-formed Parts features after this last Part Design feature in the folded view.
Before you begin: Create a web and a flange.
Switch to the Part Designapp.
From the Model section of the action bar, click Positioned Sketch
In the Sketcherapp, draw an oblique line.
Click Stiffener .
Click OK to create the stiffener.
Switch to the Sheet Metal for Hydro-formed Partsapp.
From the View section of the action bar, click Fold/Unfold.
Notes:
The stiffener is not displayed on the unfolded view.
To add a new Sheet Metal for Hydro-formed Parts feature, select a feature in the tree, and then click Define In Work Object
in the context menu. The new feature is added after the selected feature.