Creating a Stiffener

Stiffener Plate lets you add a plate normal to the neutral axis of a catalog member, a plate or a clip angle.

  1. Select a positioning point on the neutral axis of a catalog member or on the pick-able segment of a plate or clip angle.
  2. In the Stiffener Plate dialog box, select the shape of the stiffener plate and specify the dimensions of the plate.

    Tip: You can also use the dimension manipulators in the 3D area to modify the dimensions of the plate.

  3. To shift the stiffener plate to a different web-flange intersection point, click Snap to Next Joint .
  4. Select the thickness orientation of the plate.
    OptionDescription
    Front side Applies the thickness in the positive side of the UV plane.
    Back side Applies the thickness in the negative side of the UV plane.
    Both sides Applies the thickness centered on the UV plane.
  5. Click Stiffener Plate Options and specify the offsets for the plate in the U and V directions.

    Note: To reset the offset values to zero, click .

  6. Click Ok .