-
In the
Generate 2D Views dialog box, choose one of the
following framing plans:
Option | Description |
---|
Architectural
|
Generates a floor plan that cuts a horizontal section about three feet above the story
elevation and looks downward at the cut walls, doors, space, and other
building elements. The view is suitable for architects and interior
designers. |
---|
Structural
|
Generates a structural framing plan that cuts a horizontal section about three feet
above the story elevation and displays symbolic structural members
above. This output is suitable for structural engineers. |
---|
-
To set the number of sheets, in the Generate 2D Views
dialog box, select one of the following:
- Single Sheet: Generates all selected views in one
sheet.
- Multiple Sheets: Generates one view per sheet for
all selected views.
-
To change the scale of the CATIA drawing, in the Generate 2D
Views dialog box, in the Scale box,
specify a value greater than zero.
By default, the system generates CATIA drawings at a scale of 1:1.
-
To generate two-dimensional plan views:
-
In the Generate 2D Views dialog box, click
Select planes.
-
In the tree, click each plane that you want to
include.
Note:
A single CATIA drawing containing a sheet with one
view for every selected story is created.
-
Select the Whole structure check box to create a drawing
for whole product structure.
-
Expand Elevation, and select the corresponding check box
for each view.
-
In the Elevations box, one or more planes to generate
elevation views.
-
In the Sections box, select one or more planes to
generate section drawings.
-
Expand Isometric, and select the corresponding check box
for each view.
- NE Isometric is from the Northeast side of the
building.
- NW Isometric is from the Northwest side of the
building.
- SE Isometric is from the Southeast side of the
building.
- SW Isometric is from the Southwest side of the
building.
-
To include the current view, select the Include Current
View check box.
-
To create an elevation datum symbol, in the Generate 2D
Views dialog box, do the following.
-
Expand Datum Symbol.
-
To select the type of datum symbol, in the datum symbol toolbar, select
one of the following:
- Circular Datum Symbol
: The circular datum symbol displays the
name of the selected face or reference plane, and the elevation.
- Triangular Datum Symbol
: The triangular datum symbol displays
only the elevation of the selected face or reference plane.
-
To set the location of the datum symbol, in the datum toolbar, select
one of the following:
- Left Side
: The datum symbol is created on the
left side of the elevation drawing.
- Right Side
: The datum symbol is created on the
right side of the elevation drawing.
- Both Sides
: The datum symbol is created on both
sides of the elevation drawing.
-
In the Datum Elevations box, select a plane to
create the datum symbols.
-
In the Generate 2D Views dialog box, click
OK.
|