Exploiting the Messages Displayed When Executing Operations

In expert mode, the messages displayed enable the expert user to follow-up the operations execution. The expert user is asked for confirmation. For the combination operations, the expert user is prompted to validate the execution of the combination internals. The expert user can interrupt the execution whenever he wants. The execution of the operations starts where it stopped when the expert user re-executes the operations.

See Also
Testing the Process
Managing Execution Errors

There are three different types of messages:

  • The first message appears when the first operation is about to be executed. Auto Update. Sequence.1 is going to be registered for the next execution. Do you want to register it? This message is the second one to be displayed. It appears for every operation. If contained in a combination, the operations execute first, then the combination (sequential combinations) executes.
  • The second message is the following: Operation Report. Sequence.1/KnowledgeRelations.1 is the next object to execute. Do you want to proceed? If you click no, the execution is stopped. To restart the execution, click Update.
  • The last message appears when main operations are executed or when operations, set to AutoDelete, are executed: Auto Delete. Sequence.1 is going to be registered to be deleted. Do you want to register it? If you click Yes, the operation is deleted. If you click No, the operation is not deleted and is still visible in the graph.