Context: To change the default origin or use a different axis system,
click an axis system in the tree or 3D area
and from the context toolbar select Set Current
.
From the Wireframe
section of the action bar, click Axis System
.
In the Location section of the Axis
System dialog box, select a point or vertex in the 3D area to define the origin of the axis system.
Optional:
Click Custom orientation to define the axis of the
system.
In X-Axis, select a line, edge, or planar
reference from the 3D area to define the direction of the X axis.
Click Flip X-axis orientation to reverse the
direction of the axis.
In Y-Axis, select a line, edge, or planar
reference from the 3D area to define the direction of the Y axis.
Click Flip Y-axis orientation to reverse the
direction of the axis.
In Z-Axis, select a line, edge, or planar
reference from the 3D area to define the direction of the Z axis.
Click Flip Z-axis orientation to reverse the
direction of the axis.
Note:
The axes of the triad align to the normal of the directions you select. You must
specify two directions to fully define the orientation of the axis
system. The third direction is defined by the other two
directions.
Optional:
Click Set as current to make this axis system the
current system.
Optional:
Click Add to axis systems folder to add this axis system
in the Axis Systems folder.
Note:
When not selected, the feature set uses the axis system that is active in the tree. Once created, the axis system cannot be moved into or out of the
Axis Systems folder.