-
Select the geometry supports in the model.
-
Select one of the following as the
Frequency description:
| Option | Description |
|---|
| Every n increments |
Specifies the output frequency in increments. If you select this frequency option, you
must also specify n, the output frequency in
increments. The output is always saved at the last increment of each
step. |
|---|
| Evenly spaced time
intervals |
Specifies the output frequency by dividing the step into a given number of regular
intervals. If you select this frequency option, you must also specify
the Number of intervals during the step at which
output is to be saved. You might also select Output at exact
times to save results at the exact times dictated by the
number of intervals parameter. Otherwise, results are saved at the
increment ending immediately after the time dictated by the number of
intervals parameter. |
|---|
| Every x units of
time |
Specifies the output frequency in constant step time intervals. If you select this
frequency option, you must also specify x, the
time interval at which output is to be saved. You might also select
Output at exact times to save results at the
exact times dictated by the x parameter; otherwise, results are saved at
the increment ending immediately after the time dictated by the x
parameter. |
|---|
-
Use the
Output group to select the type of output:
Field or
History.
-
Specify the result variables you want to record during the
simulation in one the following ways:
- Click
Apply preselected defaults to select a set
of commonly used variables.
- Expand the output variables
tree,
and select individual variables in the tree.
-
Click
OK.
|