-
Activate a 3D view from the tree.
-
Select an annotation and drag it.
The following table describes the movements possible for each annotation.
| Annotations | Movements |
|---|
| Dimension (Lineal) |
Following movements are possible:
- Drag one or both extremes of dimension. To drag both extremes at the same time,
select one of the extremes, press Ctrl and drag( For touch
devices, you can long press and drag).
- Align both the extremes of dimension by moving one of the them close to the
projection of the other dimension by snapping them.
- Drag and change the position of the text along the edge. You can also rotate,
change the size, and position of the text by clicking it.
|
| Note |
Drag and change the position of the note along the edge. You can also rotate,
change the size, and position of the box by clicking it. |
| Balloon |
Move, drag, and change the position of the balloon. You can also rotate
it. |
| Datum |
Move, drag, and change the position of the datum. You can also rotate
it. |
| Datum Target |
Move, drag, and change the position of the datum target. You can also rotate
it. |
| Tolerance |
Move, drag, and change the position of the tolerance. You can also rotate
it. |
| Surface Finish |
Move, drag, and change the position of the surface finish. You can also rotate
the box. |
The selected annotations are moved and its orientations are
changed.
-
Click the Tab key to move the plane of annotation.
For touch devices, you can change the plane using the icon  that appears when
adding an annotation.
|