-
In the Circle type list, select Center and
axis.
-
In the Axis/line box, select an axis or a line.
It can be any linear curve.
-
In the Point box, select a point.
-
In the Radius box, type the value or use the arrows to change
the value.
Note:
To switch to diameter, click  .
Depending on the active Circle Limitations, the
corresponding circle or circular arc is displayed. For a circular arc, you can specify the
Start and End angles of the
arc.
-
To specify the axis computation mode, select the Axis
computation check box.
-
Click OK to create the circle or circular arc.
|
