- Optional:
Replace the default name with a more significant one.
-
Define the contour.
- Either create a sketch positioned on the defined plane, with the origin and u,v
direction retrieved from the stacking definition. It represents the layer boundary.
- Or create a symmetry.
-
Click
 to select a material.
-
If the layer does not share the same machine or cross direction as the stacking,
- Press Rotate: +90deg. Both directions are rotated.
- Or select Invert machine direction. Only the machine
direction is inverted.
-
From the color editor, pick the color to display the layer.
-
Select a Length inside the constraints node of the sketch.
This Length is added to the layer parameters. The parameter is linked to the
Length constraint to expose the parameters driving the geometry. The name of the parameter
is that of the constraint.
-
Optional: Select the Hide all except this layer
check box.
-
Validate.
|