-
Select the inputs.
- The layers group
- The delimitation domain. The boundary of this domain is used to define the
delimitation of the base shape for the nesting.
- The alignment constraint domain. This domain is aligned on the machine
direction.
In the example below, the Layer.1/Domain.1 is the delimitation domain. The
Layer.2/Domain.1 is the alignment constraint domain.
resulting in the following base shape
-
Select the type of the shape from the list.
- Single: Replicates the shape along the machine
direction.
- Horizontal invert: Places the first column along the cross
direction, then duplicates it along the machine direction without rotation.
- Vertical symmetry: Places the first column along the cross
direction, then alternates duplications along the machine direction with 180 degrees
rotations.
- Invert vertical symmetry: Places the first row along the
machine direction, then alternates duplications along the cross direction with 180
degrees rotations.
-
Enter the number of pieces in the nesting.
-
Click Preview.
|