- Optional:
Replace the default name with a more significant one.
-
Select a cross section or create one with a sketch.
-
Select guide lines, or create them with a sketch, a pattern, or a symmetry.
-
Click to select a material.
-
If the layer does not share the same machine or cross direction as the stacking,
- Press Rotate: +90deg. Both directions are rotated.
- Or select Invert machine direction. Only the machine
direction is inverted.
-
From the color editor, pick the color to display the layer.
-
Optional: Select the Hide all elements except the Sweep
Layer check box.
-
Validate.
|