-
From the Model section of the action bar,
click Extrusion
.
- Optional:
Replace the default name Extrusion.n with a more significant
one.
-
Define the Area by a sketch or a symmetry.
For more information on working with the Sketcher, see 3D Modeling Core: Sketcher.
-
Define the Geometries to extrude.
- Either create a sketch.
For more information on working
with the Sketcher, see 3D Modeling Core: Sketcher.
- Or create a pattern from a predefined empty sketch. The geometry is aggregated
under the layer, inside a dedicated node.
For more information on
creating patterns, see Patterning.
- Layer
- Or create a symmetry.
-
Select a layer or an elastic layer as the Pulled Layer.
-
Select a layer or an elastic layer as the Last Perforated Layer.
The extrusion is created with the color of the Pulled
Layer
-
If you have selected the same layer as Pulled Layer and
Last Perforated Layer, specify the direction as
Ascending or Descending.
-
Specify the Extrusion height.
|