Big_Curvature_Radius_in_Surface

This check verifies whether the curvature radius of surfaces exceeds the specified value. If so, the surface elements are considered as incorrect.

This page discusses:

Context

Surfaces designed with very large curvature radiuses increase the complexity of the model. You can use surfaces with smaller curvature radiuses, such as planar clamping surfaces, to reduce the complexity of the model.

Check Information

Check Details Description
Applicable to: PartFeature
Automatic Solution:
Check Parameters:
  • MinLengthOfNormal: Length type.

    Specifies the tolerance value allowed for the minimal length of normals.

  • MaxCurvatureRadius: Length type.

    Specifies the maximum curvature radius allowed.