FTA_Reference_System_Must_Exist

This check verifies if the FTA reference system, specified reference system, and the datum reference frame exist and if they are named correctly.

This page discusses:

Context

If the reference system is not complete or if the requirements are not observed, you can use this check. The healing function corrects the names in the capture and the reference system.

Check Information

Check Details Description
Applicable to: CATTPSReferenceFrame
Automatic Solution: Yes
Check Parameters:
  • Healing_Settings: Boolean type

    Corrects the names in the capture and the reference system as follows:

    • The name of the datum reference frame is replaced by the name specified in the Name of the reference system box.
      Note: As a precondition, a reference system must exist.
    • The capture name is replaced by the name specified in the Capture name box.
      Note: If no capture exists, a capture with the specified name will be created, and the reference system is added to this capture.

    Note: By default, the value is set to TRUE.
  • Name_of_the_reference_system: String type

    Specifies the name of the allowed reference system.

    Note: The name must have exactly three characters.