Generative_View_Dress-up_Properties

This check verifies whether the use of certain dress-up elements in generative views corresponds to the specification. If not, the view is considered as incorrect.

This page discusses:

Context

Use this check sparingly when a view has been generated.

Check Information

Check Details Description
Applicable to: DrwDrawing
Automatic Solution:
Check Parameters:
  • Ignore_Sheet_Names_List: List(String).

    Names of sheets to be ignored in the check.

    Note: By default, the value is set to Empty.
  • Ignore_View_Names_List: List(String).

    Names of views to be ignored in the check.

    Note: By default, the value is set to Empty.
  • Non_Allowed_Fillets: Multi Value Parameter.

    NoFillet, BoundaryFillet, FilletSymbolic, FilletOriginalEdge, FilletProjected, OriginalEdge.

    Note: No default value selected.
  • Non_Allowed_3DPoints: Multi Value Parameter.

    None, 3DSymbolInheritance, Cross Plus, Coincident, Concentric, Full Circle, Full Square, Star, Dot, Small Dot.

    Note: No default value selected.
  • Non_Allowed_3DWireframe: Multi Value Parameter.

    None, CanBeHidden, IsAlwaysVisible.

    Note: No default value selected.
  • Non_Allowed_HiddenLine: String.

    Choose the non-allowed state, either "On" or “Off”.

    Note: By default, the value is set to Off.
  • Non_Allowed_CenterLine: String.

    Choose the non-allowed state, either "On" or “Off”.

    Note: By default, the value is set to Off.
  • Non_Allowed_Pattern: String.

    Choose the non-allowed state, either "On" or “Off”.

    Note: By default, the value is set to Off.
  • Non_Allowed_3DColorInheritance: String.

    Choose the non-allowed state, either "On" or “Off”.

    Note: By default, the value is set to Off.
  • Non_Allowed_AxisLine: String.

    Choose the non-allowed state, either "On" or “Off”.

    Note: By default, the value is set to Off.
  • Non_Allowed_Thread: String.

    Choose the non-allowed state, either "On" or “Off”.

    Note: By default, the value is set to Off.
  • Check_HiddenLines: Boolean.
    Note: By default, the value is set to True
  • Check_CenterLines: Boolean.

    If the respective parameter is selected as "True", the corresponding dress-up property will be checked. Otherwise corresponding property is not checked.

    Note: By default, the value is set to True.
  • Check_3DColorInheritance: Boolean.

    If the respective parameter is selected as "True", the corresponding dress-up property will be checked. Otehrwise corresponding property is not checked.

    Note: By default, the value is set to True.
  • Check_AxisLines: Boolean.

    If the respective parameter is selected as "True", the corresponding dress-up property will be checked. Otherwise corresponding property is not checked.

    Note: By default, the value is set to True.
  • Check_Threads: Boolean.

    If the respective parameter is selected as "True", the corresponding dress-up property will be checked. Otherwise corresponding property is not checked.

    Note: By default, the value is set to True.
  • Check_Pattern: Boolean.

    If the respective parameter is selected as "True", the corresponding dress-up property will be checked. Otehrwise corresponding property is not checked.

    Note: By default, the value is set to True.