FTA_View_Definition

The check verifies whether the definition of an FTA view is isolated or has an associative support element. If the support element status does not match the specification, an error is displayed.

Note:
  • The check succeeds if the selected setting and associative state of the view match.
  • The check fails if the selected setting and associative state of the view do not match.

This page discusses:

Context

Based on the type of support, the associative elements of the view updated. The isolated FTA view remains unchanged whereas the associative view (associated with plane or coordinate system) is updated.

You can use this check whether the definition of an FTA view is isolated or has an associative support element

Check Information

Check Details Description
Applicable to: CATTPSView
Automatic Solution: No
Check Parameters:
  • Associativity_state: String type.

    This parameter is a list to check the associative state. In the list, select the required setting, Associative or Isolated.

    Note: By default, the value is set to Associative.