Non_Allowed_Link_of_FTA_Elements

This check verifies whether FTA elements are linked to certain geometry elements. The affected FTA elements are considered as incorrect.

Note: The following partial checks can be performed:
  • Type of the linked geometry element
  • Path of the linked geometry element
  • FTA elements linked to vertices or infinite geometry
  • FTA elements without links to any geometry element
  • FTA elements with links to more than one geometry element

This page discusses:

Context

This check verifies whether FTA elements are linked to certain geometry elements. The affected FTA elements are considered as incorrect.

Check Information

Check Details Description
Applicable to: CATFTAElement
Automatic Solution: No
Check Parameters:
  • Elements_linked_to_multiple_geometry_are_faulty: Boolean type

    Makes the FTA elements linked to more than one geometry element faulty.

    Note: By default, the value is set to TRUE.

  • Elements_not_linked_to_geometry_are_faulty: Boolean type

    Rates the FTA elements with a broken or missing link as incorrect. FTA elements with a missing link are rated as incorrect. Elements with broken links are not rated as incorrect.

    Note: By default, the value is set to TRUE.

  • Elements_linked_to_infinite_geometry_are_faulty Boolean type

    If this option is selected, FTA elements must not link to infinite geometry (infinite lines or surfaces).

    Note: By default, the value is set to TRUE.

  • Elements_linked_to_a_vertex_are_faulty: Boolean type

    If this option is selected, FTA elements must not link to vertices.

    Note: By default, the value is set to TRUE.

  • Elements_linked_to_these_geometry_elements_are_faulty: List (String) type

    Specifies the non-allowed types of reference geometry elements.

  • Elements_are_faulty_if_linked_geometry_path_does_not_match: List (String) type

    Specifies the required paths of reference geometry elements. Use a regular expression.