Non_Allowed_Surfacic_Fillet_Radius

This check verifies whether the surfacic fillet radiuses are in the specified allowed value range.

This page discusses:

Context

Change the non-allowed fillet radius according to the requirements. Preferably, use the fillet radii specified in DIN 250 standard.

Check Information

Check Details Description
Applicable to Surface
Automatic Solution
Check Parameters
  • Tolerance: Real type.

    Specifies the radius tolerance. Radiuses may vary upwards and downwards by the specified value.

  • FilletTypeList: Multi Value Parameter type, ConstantEdgeFillet FaceFillet GSMFilletBiTangent.