Offset_Capability_Of_Thin_Parts

This check verifies whether the surfaces in specified bodies can be transformed into an offset feature of a specified type. If no offset surfaces can be created, the bodies are considered as incorrect.

This page discusses:

Context

Offset capability depends on the properties of original surface. If a surface is not capable of being used in an offset feature, inspect the feature for possible causes. From Review section, click Surfacic Curvature Analysis to inspect the surface. Use Shading with material view mode to display the result analysis.

Check Information

Check Details Description
Applicable to: Surface
Automatic Solution:
Check Parameters:
  • DoNotMarkNotUpdatedSurfaceAsError: Boolean type.

    If set to true, the error is not displayed for non-updated surfaces. If set to false, the error is displayed for non-updated surfaces.

  • OffsetFeatureToCreate: Integer type.

    Specifies the feature which is being created after offseting:

    • 0 = Solid
    • 1 = Volume
    • 2 = Surface