Sheet_Projection_Method

This check verifies whether drawings sheets use the required projection method. If the wrong projection method is used, an error is displayed.

This page discusses:

Context

In Drafting, the views are organised arround the main view according to the projection method you define.

The two projection methods are the following:

  • ISO projection method A (First Angle Standard)

  • ISO projection method E (Third angle standard)

Check Information

Check Details Description
Applicable to: DrwDrawing
Automatic Solution:
Check Parameters: Allowed_Sheet_Projection_Method: String type.

Value is used as a reference to check the projection method value of the input sheet(s), whether CATThirdAngle or CATFirstAngle.

Note: By default, the value is set to CATThirdAngle.