Thin_Part_Orientation

This check verifies whether the surface normals and material orientation of thin parts point in the same direction. If not, the thin part is considered as incorrect.

This page discusses:

Context

Double-click the element to change the Thin Parts Attribute definition.

From the Geometry section of the action bar, click Invert Orientation and then click Reset Initial, to show the surface normal.

Check Information

Check Details Description
Applicable to: Surface
Automatic Solution:
Check Parameters:
  • Check_HybridBodies: Boolean type.
  • Check_HybridPartBodies: Boolean type
  • Check_OrderedGeometricalSets: Boolean type.
  • Check_OpenBodies: Boolean type.
  • BodyPathToCheck: Multi Value Parameter type.