View_Generation_Mode_Options

This check verifies whether the options for the “Raster” view generation mode correspond to the specification. If not, the affected view is considered as incorrect.

This page discusses:

Context

Raster views enable you to quickly generate overall views for large products or assemblies, regardless of the drawing quality. Use this check if you have generated view using the raster view generation mode.

Check information

Check Details Description
Applicable to: DrwDrawing
Automatic Solution:
Check Parameters:
  • Non_Allowed_Cust_DPIValue_Visu_Min: Real.

    Sets the lower limit for the Non-Allowed Customized Level of Detail's DPI value for Visu.

    Note: By default, the value is set to 1.
  • Non_Allowed_Cust_DPIValue_Visu_Max: Real.

    Sets the upper limit for the Non-Allowed Customized Level of Detail's DPI value for Visu.

    Note: By default, the value is set to 140.
  • Is_Cust_DPIValue_Visu: Boolean.

    If this variable is true , it will check the customized level of detail setting range for visu.

    Note: By default, the value is set to True.
  • Is_Cust_DPIValue_Print: Boolean.

    If this variable is true , it will check the customized level of detail setting range for print.

    Note: By default, the value is set to True.
  • Is_LODValue_Approx: Boolean.

    If this variable is true, it will check the level of detail range for Approximate mode option.

    Note: By default, the value is set to True.
  • Non_Allowed_LODValue_Approx_Max: Real.

    Sets the upper limit for the Non-Allowed Level of Detail value for Approximate mode option.

    Note: By default, the value is set to 5.
  • Non_Allowed_LODValue_Approx_Min: Real

    Sets the lower limit for the Non-Allowed Level of Detail value for Approximate mode option.

    Note: By default, the value is set to 1.
  • Non_Allowed_Cust_DPIValue_Print_Min: Real.

    Sets the lower limit for the Non-Allowed Customized Level of Detail's DPI value for Print.

    Note: By default, the value is set to 1.
  • Non_Allowed_Cust_DPIValue_Print_Max: Real

    Sets the upper limit for the Non-Allowed Customized Level of Detail's DPI value for Print.

    Note: By default, the value is set to 140.
  • Non_Allowed_Raster_Mode: Multi Value Parameter.

    Specify the raster modes which are not allowed. Raster Mode contains these options : Dynamic hidden line removal; Shading; Shading with edges; Shading, no light source; Shading with edges, no light source.

  • Non_Allowed_LOD_Visu: Multi Value Parameter

    Specify the level of detail settings for Visu that are not allowed. LOD visu contains these options : Low Quality; Normal Quality; High Quality; Customize.

  • Non_Allowed_LOD_Print: Multi Value Parameter.

    Specify the level of detail settings for Print that are not allowed. LOD print contains these options : Low Quality; Normal Quality; High Quality; Customize.