Performing a Simulation at Inspection Points

You can perform a forming simulation at inspection points.

From the Producibility section of action bar, click Producibility Inspection .
Select the element to inspect (Complete Product or Selection of parts).
Select the inspection points and click Apply.
A quick forming simulation is performed to retrieve the actual fiber direction at the inspection points.

Under Export Data, enter the path of the file to export and click Export Data.

The result is exported as a spreadsheet that you can review.


Point	Part	Pliesgroup	Sequence	Entity	Total Thickness(mm)	Material	Direction(deg)	Actual(deg)	Delta(deg)	Rosette
CTP-1	TunnelForming	TunnelPlies-Convex	Sequence.1	PLY-1	0.2	CARBON	45	40.59	4.414
	TunnelForming	TunnelPlies-Convex	Sequence.2	PLY-2	0.2	CARBON	0	0.119	0.119
	TunnelForming	TunnelPlies-Convex	Sequence.3	PLY-3	0.2	CARBON	45	40.59	4.414
CTP-2	TunnelForming	TunnelPlies-Convex	Sequence.1	PLY-1	0.2	CARBON	45	44.69	0.3105
	TunnelForming	TunnelPlies-Convex	Sequence.2	PLY-2	0.2	CARBON	0	0.3546	0.3546
	TunnelForming	TunnelPlies-Convex	Sequence.3	PLY-3	0.2	CARBON	45	44.69	0.3105
CTP-3	TunnelForming	TunnelPlies-Convex	Sequence.1	PLY-1	0.2	CARBON	45	45.05	0.04953
	TunnelForming	TunnelPlies-Convex	Sequence.2	PLY-2	0.2	CARBON	0	-0.1555	0.1555
	TunnelForming	TunnelPlies-Convex	Sequence.3	PLY-3	0.2	CARBON	45	45.05	0.04953
CTP-4	TunnelForming	TunnelPlies-Convex	Sequence.1	PLY-1	0.2	CARBON	45	58.78	13.78
	TunnelForming	TunnelPlies-Convex	Sequence.2	PLY-2	0.2	CARBON	0	-12.52	12.52
	TunnelForming	TunnelPlies-Convex	Sequence.3	PLY-3	0.2	CARBON	45	58.78	13.78
CTP-5	TunnelForming	TunnelPlies-Convex	Sequence.1	PLY-1	0.2	CARBON	45	32.7	12.3
	TunnelForming	TunnelPlies-Convex	Sequence.2	PLY-2	0.2	CARBON	0	4.002	4.002
	TunnelForming	TunnelPlies-Convex	Sequence.3	PLY-3	0.2	CARBON	45	32.7	12.3