-
From the Tooling
Geometry
section of the action bar, click Point
.
-
Select
Between.
-
Select two points.
-
Enter the
Ratio.
The ratio is the percental distance from the first selected
point, at which the new point is to be created. The value 0.5 creates a middle
point. You can also create a middle point
- using
Middle Point
option or
- selecting two points without activating the command from the
action bar
and clicking
Point Between
in the
context toolbar.
-
Optional: Select a surface or curve as
Support.
The point is created between the two points measured along the
support.
- If the support is a curve, the distance along the curve is used.
- If the support is a surface, the created point lies on the computed
geodesic curve between the two points on the surface.
-
Optional: To measure the ratio from the second
selected point,
- click Reverse direction
in the dialog box or
- the arrow at the point in the
work area.
If the ratio value is greater than 1, the point is located on the
virtual line beyond the selected points.
-
Click
OK to create the point.
The point (identified as Point.xxx) is added to the
tree.
|