Creating Wall Surfaces

You can create wall surfaces to connect the stamped part to the binder.

  1. From the Die Face section of the action bar, click Wall Surface .
  2. Select an axis system.

    Whenever possible, the main stamping direction or the current axis system is proposed.

  3. Select any simple wireframe with one domain as the support.
    1. Start Area Selection to define a portion of the wireframe.
  4. Optional: Expand More to define parameters.

    • Top Length and Bottom Length manage the dimensions of the wall surface.
    • Angle is the angle between the wall surface and the selected Z-axis.

  5. Click Apply.
    The wall surface is created on the selected wireframe.
  6. Optional: Edit the parameters and click Apply.
    The wall surface is updated with the new parameter values.
  7. From the context toolbar, click to invert the orientation of the wall surface.