Type of measure | - Minimum Distance: Measures the minimum distance between two entities.
- Maximum Distance: Measures the maximum distance between two entities. The distance is measured between two farthest points of the selected elements. Note that this distance is, in general, not symmetrical. The result gives the maximum distance of all distances measured from the first selection.
- Maximum Distance from 1 to 2: Measures the maximum distance between two entities. The distance is measured normal to the selection. Note that this distance is, in general, not symmetrical. The result gives the maximum distance of all distances measured from the first selection.
- Curvilinear Distance: Measures the curvilinear distance between two points along a selected support surface.
|
---|
Calculation mode | - Exact else approximate: Measures exact data and gives true values. If exact values cannot be measured, approximate values are calculated (identified by a ~ sign).
- Exact: Measures exact data and gives true values.
- Approximate: Measurements are done on tessellated objects and approximate values are calculated (identified by a ~ sign).
|
---|
Selection 1 and 2 | Select the geometric elements. You can refine your selection by selecting the required geometry type in the Selection mode boxes. |
---|
Axis System | Select this check box to perform the measurements with respect to an axis system other than the global axis system. You can either select an axis system in the work area or define an axis system by selecting two edges on the geometry. |
---|
Keep Measure | Select this check box to make the measurement persistent. |
---|
Under Measures node |
Select this check box to create the measurement feature under a dedicated
measures node in the tree. |