-
Select a stacking, a plies group, a sequence, a ply, a cut-piece or a flatten body as the parent of the stacking text.
Note:
Flatten bodies have their own behavior.
-
Select the position of the Stacking Text node under its parent.
-
Define the text.
Stacking Text supports all characters as well as keywords. In the resulting text, whenever possible, a keyword is replaced by the corresponding value. Otherwise, it remains as is in the resulting text. The interpretation of a keyword depends on its position in the stacking.
- To visualize the text only in the Stacking Text node in the tree, clear Display text in 3D.
-
Otherwise, select Display text in 3D and enter the following information.
- Support
- Start point
- dX and dY
- Other Side
- Angle
- Size
Characters are written as polylines. Unsupported characters are represented by an empty square. -
Alternatively, use its handle in the 3D area to
position and rotate the text (equivalent to dX,
dY, and Angle).
-
Select the Taken into account for laser projection as check box to export the stacking text. The following text types are available:
- 3D: The text is projected on the mold by the laser projector.
- Information: The text is displayed on the laser projector console.
- Query: The text is displayed on the console. Validation is requested by the operator.
- LED: The text is displayed on the LED display visible by the operator while laying the plies.
Note:
Texts to be exported as Information, Query, or LED must be placed under
the ply or cut-piece, not under their flatten body.
|