- Optional: Edit the name proposed for the zone.
- Select the Zones Group to contain the zone.
- From the Geometry tab create one or several contours lying on the surface.
- Optional:
Click Check Overlapped Zones to verify that the zone contour
does not overlap with another zone contour.
- Select Create 3D point to associate a point to the zone. It acts as the anchor of the zone name tag, and is used for an automatic core sampling.
- From the Laminate tab, select a laminate from the list, or click New to create one.
- From the Rosette tab, select a rosette.
- Repeat this scenario as required.
|