Analyzing Zones Bridges

You can analyze zones bridges, to help solve problems that may occur when creating the solid.

Note: This task is available in Composites Design.

  1. From the Zones Design section of the action bar, click Zones Bridge Analyzer .
  2. Select the zones group to analyze.



    The dialog box is populated with information about the zones found.
  3. Select zones in the dialog box.
    They are highlighted in the 3D area. They should all be highlighted in yellow, with one single light blue continuous external contour.

    ITP are shown with their value.

  4. Select the Micro-Edges Detection check box and enter a Limit Length to detect such edges.
    Information about the detection is displayed in the dialog box.