- The core sampling file is generated from the
points created at the zones level. The stack-up file is then generated from the core sampling
information.
- The core samples are created in the work area and found under the Core samples node.
- The xls or xlsx files NameOfRepresentation_CSExportData and NameOfRepresentation_StkUpData are created in their
directory.
- They look like this:
- Core samples file: NameOfRepresentation_CSExportData.xls:
Core Sample X Y Z
CS_Z20 429.4 mm 15.3815 mm 358.108 mm
CS_Z4 -186.298 mm 43.0578 mm 235.514 mm - Stack-up file: NameOfRepresentation_StkUpData.xls :
Sequence Ply Geo-Lvl Material CS_Z20 CS_Z4
Seq.1 Ply.1 0 Carbon 0.4 0 0
Seq.2 Ply.2 0 Carbon 0.4 45 45
Seq.3 Ply.3 0 Carbon 0.4 -45 -45
Seq.4 Ply.4 0 Carbon 0.4 90 90
Seq.5 Ply.5 0 Carbon 0.4 0
Seq.6 Ply.6 0 Carbon 0.4 0
Seq.7 Ply.7 0 Carbon 0.4 0
Seq.8 Ply.8 0 Carbon 0.4 0
Seq.9 Ply.9 0 Carbon 0.4 45
...
|