Transferring a Geometry from 2D to 3D

You can transfer a point or a curve on a ply from 2D to 3D.

Note: This task is available in Composites Manufacturing Preparation.

  1. From the Producibility, Flattening and Splicing Section section of the action bar, click Geometry Transfer .
  2. On the flattened ply, select the 2D curve or point to transfer.

  3. Select a ply as the reference entity.

    Note: When a 2D curve lies on several plies that do not have the same direction, be careful when selecting the reference entity: The curve is not represented the same way depending on the ply direction.