Creating Panels from Edges

Panel From Edge lets you create panels using the edge of an existing reference panel or extrusion.


Before you begin: Create a panel or an extrusion.
  1. Select one or more edges on the panel.
    A preview appears.

  2. Select the type and its associated parameters.
  3. In Panel parameters, define the following parameters for the panel:
    • Left and right limits
    • Offset
    • Left and right extremities

      If you select Standard, no extremity is calculated. If you select Round, define a radius.

  4. In Fold parameters, define the left and right extremities for the fold.