Copying the Track Profiles

You can copy a track profile onto different sections of the track.

  1. Expand the Rib.1 tree under Conveyor Station 1.
  2. Copy Sketch.1.
  3. Double-click Part Body in Conveyor Station 2 to select it.
  4. Click Paste.


  5. Select Sketch.2 then click Rib in the action bar.
    The Rib Definition dialog box appears.
  6. Select Sketch.1 for the Center Curve.


  7. Click Ok.
  8. To repair Feature Definition Error, double-click 3D Shapexxx under the same station.


  9. Right-click on Sketch.2.
    The Sketch Positioning dialog box opens.
  10. Click Sketch.2 object > Change Sketch Support.
  11. Select the correct plane to position sketch properly.


  12. Click OK.
  13. Share > Save > Save All