Customizing the Baseline Behavior in X-CAD Design Management

The baseline behavior is the out-of-the-box setup installed for X-CAD Design Management.

New user should be created by PLMADM from baseline behavior parameterization UI. CAD data created by user is governed by baseline behavior policies and have the new baseline behavior types.

You can customize the baseline behavior as per your requirement. For more information about customizing baseline behavior, see baseline behavior - Administration and the 3DEXPERIENCE platform user assistance.

Extension of thebaseline behavior X-CAD Design Management schema using Web Customization tool is not fully supported. If you are using the Web customization tool, then additional steps needs to be performed using Studio Modeling studio.

If you have migrated from a baseline behavior environment:

  • The baseline behavior remains as the default environment.
  • CAD data created by user will be governed by baseline behavior policies and will have the new baseline behavior types.

You need to perform the following steps with a legacy baseline behavior Administrator role after upgrading to R2015x.

  • Login as administrator and launch Update Assignments page.
  • Select each legacy baseline behavior user and re-assign the baseline behavior GCO updated by integrations in R2015x.

    This step is mandatory to ensure that legacy baseline behavior user's LCO is updated as per new R2015x specific baseline behavior GCO. Since the types are different in R2015x baseline behavior GCO, this information need to be updated to user's LCO.

To assign different GCO to different Collaborative Spaces in baseline behavior environment.

If there are different Collaborative Spaces that need to follow different Revisions of GCO then:

  1. Create Revision's of TEAM GCO.
  2. Ensure same Revision's for for all installed integrations server GCO are created.
  3. Run the mql command - modify role "Collaborative Space" add property "IEF-GCORevision" value "GCO Revision";
  4. modify role shipA add property "IEF-GCORevision" value shipA;
  5. modify role shipB add property "IEF-GCORevision" value shipB;
  6. All Users assigned shipA Project will follow GCO of shipA Revision and shipB Project will follow GCO of shipB Revision.

To work in Customer-Specific Environment, see Using X-CAD Design Management app with Customer-Specific Environment Support.