Manufacturing Information - Cutting Length

Cutting length computation for extremity point.

Extremity base cutting length calculates based on the start and end extremity of the profile.

Cutting length computation formula:

Cutting Length = Extremity Length + Positive Margin – Negative Margin–Root Gap (Bevel/Edge Prep) + Overlength(Start) + Overlength(End)

Zero point for the cutting length.

If Zero Point defined in the end cut, then calculating the cutting length is based on the zero point at the start and at the end of the profile.

Cutting length computation formula:

Cutting Length = Zero Point Length + Positive Margin – Negative Margin–Root Gap (Bevel/Edge Prep) + Overlength(Start) + Overlength(End)