Managing the Features of Curved Profiles

You can add, delete, and modify the features of curved profiles.

Click Play to watch the video:

  1. In the tree, select a bent part for a curved profile.
  2. From the Authoring section of the action bar, click Edit Features .
    The Bent Profile panel appears.
  3. In the Added Material section of the panel, enter an Overlength value and select End from the Add To list.
    The added material feature appears at the end of the profile.
  4. Select the Inverse Bending Curve tab and clear Generate Curves.

    Note: In the case of a rolled profile, the Roll Line tab appears in place of the Inverse Bending Curve tab.

    The inverse bending curve feature removes in the auxiliary viewer.
  5. Select Generate Curves.
    The inverse bending curve feature appears in the auxiliary viewer.
  6. Update the values for Marking Zone Clearance and Minimum Overlap, and select V-Vector Down for Burn Side Up.
    The inverse bending curve feature updates in the auxiliary viewer.