Weld Flange Marking Line

You can verify visually the marking line regarding the contact between the flat bar and the panel position is not at the weld location. There would be an offset on the panel when the data imports.

Click Play to watch the video:

  1. Create the MBOM through Heavy Structure Manufacturing App
  2. From the Authoring section of the action bar, click Generate MBOM .
    The Generate MBOM panel appears.
  3. Select the root manufacturing assembly.
  4. Click OK.
    Sub parts and manufacturing representations generate under the manufacturing assembly.
  5. Expand the Auxiliary viewer to create the Part and Weld Planning in Heavy Structure Fabrication.
  6. Click Part Planning .
  7. Select the Part, and OK.
  8. Click Weld Planning , and OK.
  9. Click Update In-Process Models , and OK.
    Note: Visually verify the marking line regarding the contact between the flat bar and the panel position is at the weld location. There is an offset on the panel.