View Section

The View section of the action bar provides commands for hiding or showing machining elements.

Notes:
  • Hiding objects requires Shading (SHD) , otherwise they are set to full transparency.
  • In Material Removal mode, for the simulation, the part design is set to full transparency, to display only the stock.
  • If Display tool path during machine simulation is activated, the modifications done with the View section commands are not saved when you exit the current session.



Hide/Show parts elements
Hides or shows part elements.
The following commands are available in all the sections of the action bar.


Hide/Show Machine
Hides or shows the NC machine.


Hide/Show Accessories
Hides or displays the machine accessories.


Hide/Show Tool Holders
Hides or shows the tool holders.


Hide/Show Cut Stock
Hides or shows the cut stock.


Hide/Show Stock
Hides or displays the stock.


Hide/Show Part
Hides or shows the part.
Hide/Show Other Geometries
Hides or shows additional geometries.


Hide/Show Tool Path
Hides or shows the Tool Path in simulation.