Geometry Parameters

Geometry

Part profile

Part and rough stock profiles are required. They is specified by selecting edges either directly or after selecting the By Curve context menu command in red part area.

See Selecting Edges and Faces to Define Geometry.

Rough stock offset

This is defined perpendicular to the rough stock profile.

Part offset

This is defined perpendicular to the part profile.

Axial part offset

This is defined perpendicular to the part profile.

Radial part offset

This is defined perpendicular to the part profile.

Offsets is positive or negative with any absolute value. The global offset applied to the part profile is the resulting value of the normal, axial, and radial offsets.