Geometry Parameters
- Part profile
- Part and
rough stock profiles are required. They is
specified by selecting edges either directly or after selecting the
By Curve
context menu
command in red part area.
See
Selecting Edges and Faces to Define Geometry.
- Rough stock offset
- Specifies a virtual displacement of the rough stock profile.
- Part offset
- Specifies a virtual displacement of the part profile.
- Axial part offset
- Specifies a virtual displacement of the part profile along the
spindle axis direction.
- Radial part offset
- Specifies a virtual displacement of the part profile in the
radial axis direction.
|