About 3D Feature for Spindles and Turrets

When the spindle or turret item is selected in the spindle turret tab of the Create a Generic Machine > Mill-Turn Machine, the corresponding spindle/turret and the associated spindle turret axis system is highlighted in the work area.

This page discusses:

3D Feature for Spindles

This describes the features for spindles.

When the spindle is selected, Spindle1.1 in the spindle list of Spindle tab of the Create a Generic Machine > Mill-Turn Machine, the corresponding spindle and the associated spindle axis system are highlighted in the work area.

3D Feature for Turrets

This describes the features for turrets.

When the turret is selected, Turret1.1 in the turret list of Turret tab of the Create a Generic Machine > Mill-Turn Machine, the corresponding turret and the associated turret axis system are highlighted in the work area. This is applicable for mill turret also.

3D Feature for Programming

This describes the features for programming.

When a program is edited, its associated turret and corresponding turret axis system are highlighted in the work area. This is also applicable for mill turret.

3D Feature for Machining Operations

This describes the features for machining operations.

Insert a Machining Operation, say rough turning, on mill-turn machine. Select a spindle associated with the Machining Operation. The spindle and the corresponding axis system is highlighted in the work area.