Specify Angular Limitations Dialog Box

The Set the Angular Limitations dialog box shows the Degrees of freedom on segments and you can edit them.

To access the dialog box, select Angular limitations with Percentage .

This page discusses:

Degrees of Freedom

DOF 1 to 3
Select the required degree of freedom required.

Segments

DOF 1 to 3
This area lists the Segments for the degree of freedom selected.

Percentage

50.00%
This area edits the percentage of the degree of freedom. Select a Percentage between 0 and 100. Both the limits (minimum and maximum) of all degrees of freedom selected takes on the specified percentage.

OK, Cancel

DOF 1 to 3
Select OK to accept, Cancel to close.