Inserting Existing Products Into the Scenario

This describes how to insert a Product, a Motorcycle into the workplace scenario.

See Also
Creating a Manufacturing Resource for a New Workplace Scenario and Inserting Manikins.

Click Play to watch the video:

  1. Click the Manufacturing Cell and select , Existing Product or Resource from the action bar.
  2. Click the Manufacturing Cell and from the top bar, enter the Product name in the3DSearch box.
    The Search window appears with our search for this scenario, riding_motor*.
  3. Click riding_ motorcycle from the Display name column.
    The riding_ motorcycle appears in the 3D area and move accordingly using the 3DCompass.
  4. Right-click the Robot and select Snap Automatically to Selected Object.
  5. Click F3 to view the tree then click the Tree tab and select riding_ motorcycle.
    With the riding_ motorcycle selected, you can move the bike to the required coordinates position.
  6. Once completed, select and move the riding_ motorcycle's Robot back to the lower corner and right-click to deactivate Snap Automatically to Selected Object.
  7. Right-click Manufacturing Cell in the Tree then click Properties.
    The Properties dialog box appears.
  8. In the Properties dialog box, enter the title for this scenario Manufacturing Cell 1 in the Title section. Then click Apply then OK.
    Applies the new title.
  9. From the top bar, click Share and Save.
    Saves the changes.